XMINNOV
中文版 English
Home >> Products >> RFID Reader

RFID Reader

  • BU04 RFID UHF/1D/2D integrated wireless scanner Handheld reader
BU04 RFID UHF/1D/2D integrated wireless scanner Handheld reader

BU04 RFID UHF/1D/2D integrated wireless scanner Handheld reader

    • Support UHF tag protocol ISO18000-6C

    • Standby for 3 months after booting, working continuously for 26 hours (continuous frequent manual key reading)

    • Compatible with a variety of applications, easy to use in a variety of applications

    • Support Windows, Android and iOS Systems

    • No need for APP, no driver, no system platform, easy use

    • Both of wireless air protocol and USB RFID Reader bluetooth reader

    • Widely used for warehouse, logistics, transportation, retailing


Presentation e-Catalogue Case Studies Datasheet Enquiry
  • BU04 RFID UHF/1D/2D integrated wireless scanner

  • Part No: IVF-BU04

  • Support UHF label protocol ISO18000-6C

  • Support system: Windows、IOS、Android etc.

  • Communication interface: BLE4.0 HID

  • RFID reading distance: 2-20cm(Depend on the RFID tag antenna size)

  • 1D/2D reading distance: 20mm~310mm  1 million pixels

  • Code recognition system: 

    1D: UPC-A , UPC-E, UPC-E1, EAN-8, EAN-13,EAN-14, EAN-128, UCC128, ISBN/ISSN,CODE11, CODE32, CODE39, CODE39 Full ASCII, CODE93,CODE128, Cross 25, industry 25, matrix 25, China Post Code, UK/Plessey,GS1,etc.

    2D: QR Code, Data Matrix, PDF417,etc.

  • Working hours: 260 hours after startup and standby, and 26 hours after continuous operation (without continuous and frequent manual key reading of light compensation lighting)

  • Working times: 25000 times of continuous working reading (continuous and frequent manual key reading without light compensation lighting)

  • Material: ABS + PC engineering plastics

  • Battery capacity: 2200mA

  • Charging mode: USB 5V / 1a, with seat charging, charging for 5 hours

  • Buzzer: Built-in buzzer

  • Key: key triggered reading

  • Working environment temperature: -20℃~50℃

  • Indicator Status: 

    ① normal operation: the green light is on for all the time, and the blue light is displayed when the Bluetooth connection is successful;

    ② read successfully: white light flashes and buzzer sounds;

    ③ equipment abnormality: after pressing the key, the indicator light does not light up;

    ④ low power: the blue light flashes after pressing the key

    ⑤charging: the red light is on for a long time

    ⑥charging completed: red light off 

  • Mode switching:AT+BU04=1  ——  1D/2D mode;

    AT+BU04=2  ——  1D/2D+RFID mode;(Text mode (0x0D))

    AT+BU04=3  ——  1D/2D or RFID mode;(read one of them is enough)

    AT+BU04=4  ——  1D/2D+RFID mode;(excel file mode-tab(0x09))

BU04 Scanner-One UHF Wireless scanning reader.jpg

RFID Reader Model Description
  • B: Bluetooth

  • T: Tag

  • U: Ultra High Frequency(UHF)

  • H: High Frequency

  • KB: KeyBoard Simulator

  • PB: Palm Keyboard

Value Points

  • IVF-BU04 is the second extension of the second generation of UHF Bluetooth reader BU01. It can be connected with windows, IOS, Android and other intelligent system platforms through Bluetooth interface, and used as an analog keyboard. It integrates two-dimensional barcode reading engine and UHF RFID reading and writing module, adopts advanced CMOS image recognition technology and intelligent image recognition system, which can easily read barcode on paper, commodity and other media, and identify RFID information on media. The device does not need secondary development and is compatible with various application software, so it is convenient for application in various occasions.

  • No need app, no drive, no system platform, i.e. ready to use

  • For the Bluetooth HID keyboard, please note that the input method should be in the English alphabet input state

  • 1. Start up and power on the equipment;

  • 2. in the mobile phone flat or board setting, configure the Bluetooth connection with the corresponding number of the connection product

  • 3. Open the text or word input box

  • 4. Press the key to read the label to display 1D / 2D / EPC in the corresponding mode on the terminal.

BU04 Scanner-One UHF Wireless scanning reader





ENQUIRY

CONTACT US

Cellphone:
+86-13606915775(John Lee)

Phone:
+86-592-3365735(John)
+86-592-3365675(Cathy)
+86-592-3166853(Margaret)
+86-592-3365715(Anna)
+86-592-3365685(Ellen)
+86-592-3365681(Lynne)

Email: sales@rfidtagworld.com

Add: No.943, Tonglong Er Lu, Hongtang Town, Tong'an District, Xiamen( Xminnov IOT Industrial Park)